Visonic POWERMASTER-10 - INSTALLER GUIDE Especificaciones descargar pdf (Pagina 71)

70 D-302756

To reset the PowerLink Broadband Module

To reset all LAN setting definitions (does not reset Monitoring Station IP definitions)

∗ If there are no wireless devices enrolled in the PowerMaster-10

system, the PowerMaster-10 display reads "

NO DEVICES

Pressing the or buttons at any stage in the procedure

will take you to “

<OK> TO EXIT

” or pressing the

button at the

end of the procedure will take you to the "

WL DEVICES

" menu.

6 CALLING UPLOAD/DOWNLOAD SERVER

Note:

This option is only used during the installation of panels monitored by compatible Monitoring Stations.

This option allows the installer to initiate a call to the upload/download server. The server uploads the

PowerMaster-10 configuration to its data base and can unload predefined parameters to the PowerMaster-10.

To Perform Server Upload/Download

Repeat steps 1 to 4 of section 4.2 "Entering the Installer Menu".

If the UL/DL server telephone number was already defined (see section

4.7.3.1 "Configuring the Types of Events to be Reported"), the

PowerMaster-10 display will read "COMMUNICATING" which is displayed

during the dialing process.

If the UL/DL server telephone number was not defined (see section

4.7.3.1 "Configuring the Types of Events to be Reported"), the

PowerMaster-10 display will read "TEL# NOT DEFINED" which is

displayed for approx. 30 sec. and is followed by a sad (failure) tune.

If communication has been established between the PowerMaster-10

control panel and the upload/download server, the PowerMaster-10

display will read "DOWNLOADING" which is displayed during the dialing

process.

If communication has failed between the PowerMaster-10 control panel

and the upload/download server, the PowerMaster-10 display will read

"DIAL ATTEMPT FAIL" which is displayed for approx. 30 sec. and is

followed by a sad (failure) tune.

After the downloaded/uploaded process has been completed

successfully, the PowerMaster-10 display will read "DOWNLOAD OK"

which is displayed for approx. 30 sec. and is followed by a happy

(success) tune.

If communication has been established between the PowerMaster-10

control panel and the upload/download server but the

downloaded/uploaded process has failed, the PowerMaster-10 display

will read "DOWNLOAD FAILED" which is displayed for approx. 30 sec. and

is followed by a sad (failure) tune.

DOWNLOAD FAILED

DOWNLOAD OK

DIAL ATTEMPT FAIL

DOWNLOADING

TEL# NOT DEFINED

COMMUNICATING

START UL/DL

FACTORY DEFIN.

REBOOT

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 85 86

Comentarios a estos manuales

Sin comentarios

Visonic POWERMASTER-10 - INSTALLER GUIDE Especificaciones Pagina 71

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Visonic POWERMASTER-10 - INSTALLER GUIDE