Visonic POWERART Guía de usuario descargar pdf (Pagina 7)

DE5458U 7

2. SECURING THE PROTECTED SITE

. SECURING THE PROTECTED SITE. SECURING THE PROTECTED SITE

. SECURING THE PROTECTED SITE

2.1. Security-Related Pushbuttons

Key Function

Arming when nobody is at home

Arming when people remain at home

Canceling the entry delay upon arming

(‘AWAY-INSTANT’ or ‘HOME-INSTANT’)

Disarming the system and stopping alarms

Testing the system (see Para. 6.7).

2.2 Preparing to Arm

Before arming, make sure that READY is displayed:

READY HH:MM

If Ready is displayed, all zones are secured, and you may

arm the system any way you choose.

If at least one zone is open (disturbed), the display will read:

NOT READY HH:MM

If NOT READY is displayed, click

to review the

numbers and names of all open zones one by one.

Let us assume that zone 2 (ROOM 1) and zone 13

(ROOM 2) are open. To investigate, proceed as follows:

Action Resultant Display Sound

☞

NOT READY HH:MM

☞

ROOM 1

(alternating)

Z2 OPEN

☞

ROOM 2

(alternating)

Z13 OPEN

None (see note

(after 10 seconds)

below)

NOT READY HH:MM

Note: To quit immediately at any stage, press

☞

It is highly recommended to fix the open zone(s), thus

restoring the system to the state of “ready to arm”. If you

do not know how to do this, consult your installer.

IMPORTANT! All arming procedures below are based on

the assumption that quick arming has been enabled by

the installer. If quick arming is disabled, the PowerArt

will prompt you to enter your security code before arming.

2.3 Arming ‘AWAY’

If the system is READY, proceed as shown:

Action Resultant Display Sound

☞

ARMING AWAY

PLEASE EXIT NOW

Vacate the premises

(Exit Delay)

AWAY

ARM lights steadily throughout the armed state

2.4 Arming ‘HOME’

If all perimeter zones are READY, and quick arming is

allowed, proceed as shown:

Action Resultant Display Sound

☞

ARMING HOME

Move to interior zone

(Exit Delay)

HOME HH:MM

ARM flashes throughout the armed state

2.5 Switching from ‘HOME’ to ‘AWAY’

Do not disarm the system - just press

☞

. The

response will be the same as in Para. 2.2. Vacate the

premises before the exit delay expires.

2.6 Switching from ‘AWAY’ to ‘HOME’

Do not disarm the system - just press

☞

Since

this operation reduces the security level, the PowerArt™

will ask you to key in your master or user code, thus

making sure that you are an authorized user.

Action Resultant Display Sound

☞

CODE

___

☞

[

]

ARMING HOME

Move to interior zone

(Exit Delay)

HOME HH:MM

ARM flashes throughout the armed state

If an alarm occurred while the system was armed in the

AWAY mode, the display will respond differently:

Action Resultant Display Sound

☞

CODE

___

☞

[

]

ARMING HOME MEM

Move to interior zone

(Exit Delay)

HOME HH:MM

(alternating)

HOME MEMORY

ARM flashes throughout the armed state

2.7 Arming ‘Instant’

You may arm AWAY or HOME without an entry delay -

any detection in any zone will trigger an immediate alarm.

If you wish to arm AWAY-INSTANT, proceed as follows:

Action Resultant Display Sound

☞

ARMING AWAY

☞

ARMING INSTANT

(alternating)

PLEASE EXIT NOW

Vacate the premises

(Exit Delay)

AWAY

ARM lights throughout the armed state

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Comentarios a estos manuales

Sin comentarios

Visonic POWERART Guía de usuario Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Monóxido de carbono (co) detectores Visonic POWERART