Visonic POWERMASTER-10 Guía de usuario descargar pdf (Pagina 20)

SPEECH AND SOUND CONTROL

D-303223 PowerMaster-10 / PowerMaster-30 User's Guide 19

Voice ON/OFF

You can switch spoken announcements on and off by alternate clicking of the <7> key, as shown below.

PRESS

RESULTING DISPLAY

VOICE ON

VOICE OFF

↓

READY HH:MM

Note: The system will maintain the “Voice OFF” state until subsequent selection of “Voice ON’.

Message Exchange

For message exchange you can record a verbal message for other users of the alarm system. Face the panel,

press <2> and keep it pressed. When the display reads TALK NOW, start talking. The 5 dark boxes will slowly

disappear one by one, from right to left, as shown in the diagram below.

ACTION RESULTING DISPLAY

(constant)

RECORD A MESSAGE

Talk ↓

TALK NOW

Talk ↓

TALK NOW

Talk ↓

TALK NOW

Talk ↓

TALK NOW

Talk ↓

TALK NOW

Stop talking

RECORDING ENDED

Once the last of the boxes disappears, RECORDING ENDED will be displayed.

When you release the button, the display will revert to the normal status-displaying mode, but will also indicate

that a message is waiting. For example:

READY HH:MM

(alternating)

READY MSG

To check your own message, listen to it within one minute from the end of recording (see the next section -

Message Playback). This way the MSG indication will not be erased.

Message Playback

To listen to a message left by another user of the system:

Click

and listen. PLAY will be displayed and the message will be played back over the built-in

loudspeaker. When the playback ends, the display will revert to the normal status-displaying mode. If more than

1 minute elapsed after recording, the MSG indication will disappear.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 75 76

Comentarios a estos manuales

Sin comentarios

Visonic POWERMASTER-10 Guía de usuario Pagina 20

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Visonic POWERMASTER-10