Visonic POWERMASTER-10 Guía de usuario descargar pdf (Pagina 48)

MENUS AND FUNCTIONS

D-303223 PowerMaster-10 / PowerMaster-30 User's Guide 47

C.12 Enabling / Disabling the Squawk Option

The PowerMaster-10 / PowerMaster-30 system (and its wireless sirens) can be set to produce a short

"Squawk" of audible feedback to assist you when you use your keyfob to arm (1 beep) and disarm (2 beeps)

the PowerMaster-10 / PowerMaster-30 system (operates in a similar manner to a car alarm).

♦ Here you can enable / disable the Squawk.



Carefully read the section titled "Additional Information" according to the indicated references

etc – see

table at end of this section.

Enter the USER SETTINGS menu, select the [SQUAWK] option and

press the button to confirm.

The display shows the currently selected setting.

Click the or button until the display reads the desired

setting, for example, "Squawk OFF" and press the button to

confirm.

☺ Return to step 1

A "Happy Tune" ☺ sounds. The display confirms the saved setting,

then returns to the User Setting menu, step 1.

3, 4

Additional Information (section C.12)

For detailed instructions on how to select User Settings – refer to section B.1 and section B.2.

a. The display shows the currently selected setting (indicated by a



symbol), for example,

Squawk ON

b. You can now enable (ON) or disable (OFF) the Squawk option using the or button.

The



symbol now appears next to the new selected option.

You can now select another option in the User Setting menu (see section B.1 and section B.2), or quit

programming (see section B.3).

Squawk OFF

Squawk ON



SQUAWK OFF



SQUAWK

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 75 76

Sin comentarios

Visonic POWERMASTER-10 Guía de usuario Pagina 48