Visonic POWERMASTER-10 - INSTALLER GUIDE Guía de usuario descargar pdf (Pagina 32)

MENUS AND FUNCTIONS

D-303223 PowerMaster-10/30 G2 User's Guide 31

The display shows the current setting of the Auto-Arm Time, for example, "

12:00 PM

", with the cursor

blinking on the first hour digit "1". For detailed explanation of how to set the time - refer to Section B.7 B.

The saved auto arm time is displayed without the cursor, for example, "

08:30 A

You can now select another option in the User Settings menu (see section B.1 and section B.2), or quit

programming (see section B.3).

B.11 Programming Private Phone and SMS Reporting

The PowerMaster system can be programmed to send various event notification messages such as alarm,

arming or trouble events, to 4 private telephone subscribers by audible signal and, if a GSM option is installed,

also to 4 SMS telephone numbers. These reports can be programmed either instead of or in addition to the

reports transmitted to the monitoring company. Further details about the event notification by telephone and by

SMS are provided in Chapter 7. Event Reporting and Control by Telephone and SMS.

You can also determine the number of times the private telephone number is dialed and whether a single

acknowledge signal will stop the reporting process or an acknowledge signal from each telephone will be

required before the current event is considered reported.

Here you can program:

 The specific events you wish the system to report.

 The 1

, 2

, 3

, and 4

private telephone and SMS numbers for reporting alarm and other event messages

to private subscribers.

 The number of redial attempts, two-way voice communication



, and whether to use a single acknowledge

signal or an acknowledge signal from each telephone before the current event is considered reported.

Notes: The notification of events to other 3rd party applications (SMS/IP/personal phones) is a supplementary

feature that has not been investigated by UL and is not used in UL listed installations.



Carefully read the section titled "Additional Information" according to the indicated references

etc – see

table at end of this section.

VOICE REPORT

A. To Program Events to be Reported to private telephone

Enter the [USER SETTINGS] menu and select the [PRIVATE REPORT]

option and press .

The display will read [VOICE REPORT]. To enter this option press

When the display reads [REPORTED EVENTS] press .

The display shows the currently selected option.

Click the or button until the display reads the event group

you wish to be reported via private phones, for example, [alarms].

When you are satisfied with the setting, press to confirm.

☺ Return to step 3

A "Happy Tune" ☺ sounds. The display confirms the set events to be

reported, and returns to step 3.

5, 13



Refers to PowerMaster-30 G2 with voice option only

PRIVATE REPORT

VOICE REPORT

REPORTED EVENTS

disable report



alarms



1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 61 62

Comentarios a estos manuales

Sin comentarios

Visonic POWERMASTER-10 - INSTALLER GUIDE Guía de usuario Pagina 32

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Visonic POWERMASTER-10 - INSTALLER GUIDE