Visonic AMBER CLASSIC Guía de usuario descargar pdf (Pagina 43)

Chapter 9: Connecting to the Amber Control Panel

D-300951 Home Health Care PC User Guide 43

9.1.1 Local Connection (Serial Port)

Local connection is used when the HHCPC is within direct cable connection distance from

the Amber control panel. When using Local Connection there is no need for a modem. Only

communication ports without installed modem drivers may be used in Serial mode. For

example, if the modem drivers are installed on the ports COM2 and COM3, then ports COM1

and COM4 may be used for connection in Serial mode.

1. From the Communications mode drop-down list, select Serial Port. The serial

port parameters are displayed as follows:

• The Comm port field becomes enabled.

• The Baud rate field displays 115200, this being the baud rate used for serial

connection. The Baud rate field is disabled.

• The Parity and the Stop bits fields do not change and are disabled.

Figure 9-13: Communications Mode - Serial Port

2. Change the Comm port field as necessary.

3. Click OK.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 59 60

Sin comentarios

Visonic AMBER CLASSIC Guía de usuario Pagina 43