Visonic AMBER CLASSIC Guía de usuario descargar pdf (Pagina 7)

Chapter 1: Introduction

D-300951 Home Health Care PC User Guide 7

Chapter 1: Introduction

The HHCPC is a utility program that enables you to manage the Amber control panel from

a remote station. It runs on PC workstations with Microsoft

Windows XP.

It allows offline preparation of specifications, each of which is a set of parameters

especially tailored for a particular HHCPC installation site. After the user has prepared the

parameters for the site, they can be downloaded into the Amber control panel on the site.

Data is transferred to and from the HHCPC either locally through an RS-232 serial data

cable, as shown in figure 1-1, or remotely via telephone lines and a modem, as shown in

figure 1-2.

Local Data Transfer enables the operator to prepare the parameters for the Amber control

panel on a PC where the operator specifies parameters in the Site Screens, even though the

operator is working at the same installation site. The operator then transfers the data to the

control panel through a cable.

LOCAL SETUP

no modem is

required for

local download

HHCPC Amber

RS-232

CABLE

Figure 1-1: Setup for Local Data Transfer

Remote Data Transfer enables the operator to work from a remote site where several

Amber systems can be controlled at different installation sites. Using the HHCPC, the

operator can compare the parameters of the different systems and copy them if necessary.

The data is then transferred to each HHCPC through a modem.

Amber

RS-232 CABLE

REMOTE SETUP-

EXTERNAL MODEM

EXTERNAL

MODEM

TEL. LINE

HHCPC

Figure 1-2: Setup for Remote Data Transfer with an External Modem

Note: An external modem is required. It is recommended to use the approved model, USR

5686 or USR 5633 from US Robotics.

Note: For UL installations, the HHCPC and the Amber unit must be located in the same

room.

1 2 3 4 5 6 7 8 9 10 11 12 ... 59 60

Sin comentarios

Visonic AMBER CLASSIC Guía de usuario Pagina 7